Chemical Composition
Carbon: 0.12% (Max)
Manganese: 1.00% (Max)
Silicon: 1.00% (Max)
Phosphorous: 0.04% (Max)
Sulfur: 0.03% (Min)
Chromium: 16.0%-18.0%
Nickel: 0.75% (Max)
Properties
Tensile Strength: 65,266 PSI
Yield Strength: 29,732 PSI
Elongation: 22%
*These numbers are "Typical" properties and may not be required to meet this grade. Please check with your Alro Sales Representative if physical properties are required for your application.*
Typical Uses
Typical uses for 430 include:
- Linings for Dish Washers
- Refrigerator Cabinet Panels
- Automotive Trim
- Lashing Wire
- Element Supports
- Stove Trim Rings
- Fasteners
- Chimney Liners
|
|
430-2B Finish Stainless Steel
Alro stocks 430 Stainless Steel Sheet - a ferritic, straight chromium, non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties. Its ability to resist nitric acid attack permits its use in specific chemical applications, but automotive trim and appliance components represent its largest fields of application. 2B is a mill finish cold roll sheet.
|
|